The AD600E device built in with independent research and development of the core image intelligent processing algorithm, Using a camera to real-time capture the characteristics of the driver's fatigue state image, and fast through the core analysis board of the host, give warning and reporting to the fatigue driving and unsafe driving behavior.
What was once a futuristic idea is now reality thanks to the convergence of Advanced Driver Assistance Systems (ADAS) +Telematics+Face recoghnization+Telematics+Voice warning to the driver.
System Core Value
Atelematics Inteligent Driving
Assistant System
(1)Driver identity recognition
(2)Real-time monitoring and voice warning of fatigue driving
(3)Unsafe driving behavior monitoring, capture and reporting
(4)Lane shift and collision warning
(5)Early warning can prevent 90% of rear-end collisions
Product Features
|
Fatigue
driving detect
|
Check drivers'
fatiguing through eye and face change and give different level of alarm
|
Adaptive alarm
sensitivity adjustment based on vehicle speed
|
All-weather environmental adaptation
|
Identification
of driver
|
Face recognition algorithm
|
Identity
completion within 3 seconds
|
Driver's identity
registration, authentication and inquiry
|
Support
recognition results voice prompting and reporting
|
Monitoring
of bad driving behavior
|
Monitoring and
reporting on the behavior of yawning,fatigue driving
|
Monitoring and reporting on the
behavior of driving with a call
|
Monitoring and reporting on the behavior of driving without
seat belt
|
Monitoring and reporting on the
behavior of driving smoking
|
Monitoring and
reporting on the behavior of drive away from the line of sight
|
Lane
shift and crash alarming
|
Lane shift detect and reporting
|
Calculation of
collision warning level based on real-time GPS speed
|
Monitoring the driver lane
change without turn on the turning light
|
Item
|
Parameters
|
Operate system
|
Linux
|
Baud rate
|
115200
|
Size
|
Device:
154.5mm x 120mm x 40.8mm
|
Fatigue camera: 123mm x 53mm x 38mm
|
ADAS camera: 55mm x 28mm x 28mm
|
External interface
|
RS232,RS485,USB
|
Working Voltage
|
9-36V
|
Working Current
|
480-700mA
|
Average power
|
7W
|
Working temperature
|
-20℃ - +70℃
|
Moisture
|
<=85%
|
Locate Sensitivity
|
5m,CEP
|
Locate time
|
Cold
start(average): 32s
|
Best position for take picture
|
80-120cm
|
resolution ratio
|
720
x 1280
|